3S Battery Lipo,2 Packs 11.1V Lipo Battery 5200mAh Soft Case for RC Car/Truck, Boat,Drone,Buggy,Truggy,RC Helicopter, RC Airplane,UAV, FPV (Short)

Product Description
3S 5200mAh 50C/80C LiPo pack built for 1/10 RC cars, boats, and quads. Low‑IR cells and 10AWG wire deliver steady power under load. Soft‑case saves weight and fits most trays. Matched pairs ensure balanced performance every run.

Specification

• Chemistry: LiPo, 3S (11.1V)

• Capacity: 5200mAh

• Discharge: 50C / 80C (optional)

• Per‑cell voltage: 4.2V max, 3.2V min  (cutoff recommended)

• Charge plug: JST‑XH

• Discharge plug: TRX / EC5 / XT60 / Deans (optional)

• Wire: 10AWG silicone

• Recommended charge: 2.6A–5.2A (0.5C–1C) 

• Size: 136×45×32 mm (±3) 

• Weight: 359g ±15g

Packing Included
2× 3S 5200mAh 11.1V LiPo batteries (soft case) 

Application
Fits 1/10 scale models: Slash VXL (2WD/4x4), Rally, XO‑1, E‑Maxx, Spartan, Rustler/Bandit/Stampede VXL, and Aton quads. Also compatible with other vehicles sharing similar voltage and tray size – check your ESC/LVC settings.

Please Notice

• Never charge unattended; use a genuine balance charger only.

• Store in a LiPo safety bag at 3.8–3.85V per cell.

• Inspect for damage/puffing before each use.

• TRX plug version lacks ID chip – not compatible with new Traxxas ID models/chargers without an adapter.

FAQ
Q1: What charge rate should I use?
A: 0.5C–1C (2.6A–5.2A). Always balance‑charge with a genuine charger.

Q2: How long does it run?
A: Typically 15–25 min aggressive or 25–35 min moderate driving, depending on motor/terrain. Stop at 3.2V/cell.

Q3: Can I use it with an old TRX connector?
A: Yes, if you select TRX. For new ID‑plug systems, use an old‑to‑ID adapter.

Q4: How to store it?
A: Use charger’s storage mode to 3.8–3.85V/cell, keep in cool/dry place inside a fireproof bag.

Q5: What if voltage drops below 3.0V?
A: Stop immediately. Slow‑charge at 0.5C and monitor – if puffed or unbalanced, dispose safely. Set ESC cutoff to 3.2V to avoid this.