Nihewo 3S Lipo Battery 2Packs 11.1V 6500mAh RC Lipo Battery 90C Hard Case Compatible with Arrma HPI 1/8 1/10 RC Truck Vehicles Car Truggy Buggy Tank Hobby

3S RC Lipo Specification:
Material: Lithium polymer
Cell Configuration: 3S1P
Battery Voltage: 11.1V
Cell Voltage:3.2V-4.2V
Capacity: 6500mAh
Suggest Charge Rate: 0.5C-1C (3.25A-6.5A)
Discharge Rate: 90C
Charge Plug: JST-XH
Discharge Plug: Trx/EC5/Deans T/XT60 Connector (optional)
Wire Gauge: 10AWG Soft and Flexible Low Resistance Silicone Wire
Dimension:139*47*36mm(±3mm)/ 5.47*1.85*1.42inch(L*W*H)
Approx Weight: 430g(±15g)/ 0.95lb / 15.17oz

3 Cell Lipo Battery Package Included:
2 Packs x 11.1V Lipo Battery 3S 6500mah 90C Hard Case
2pcs x EC5 Female Adapters（Not included）

11.1V Lipo Battery Fits For These RC Models:
-1/10 and 1/8 RC Truck Series

11.1V RC Battery Please Notice:
This lipo battery have not ID function.
Don't overcharge exceed 4.2V and don't over-discharge below 3.2V.
Don't leave the battery unattended while charging.
Please charge it with a real brand balance charger (no fake brand charger).
Please store it in a safety guard bag.

FAQ
Q1: Can I use this with my EC5‑equipped truggy?
A: Yes – select EC5 at checkout, and it comes with that plug. 

Q2: What runtime can I expect?
A: Roughly 20–35 min in 1/10 trucks (3650 motor) or 12–20 min in 1/8 scale, depending on gearing and throttle use.

Q3: How do I balance‑charge correctly?
A: Connect both the main lead and JST‑XH balance plug to your charger. Set to “LiPo 3S”, choose 3.25–6.5A. Always use the balance lead.

Q4: Will the hard case fit my battery tray?
A: The case is non‑removable and measures 139×47×36mm – please measure your tray before purchase to ensure clearance.

Q5: What if the battery puffs or gets hot?
A: Stop using immediately. Let it cool outdoors, then recycle at a LiPo‑approved facility. Never puncture or recharge a swollen pack.