Nihewo 3S Lipo Battery, 2Packs RC Battery 11.1V 7500mAh 100C 3S Lipo Hard Case Compatible with Arrma Axial Losi 1/8 1/10 RC Car Truck Truggy Vehicles Tank Boat Airplane Models

11.1V Lipo Battery Specification:
Material: Lithium polymer
Cell Configuration: 3S1P
Battery Voltage: 11.1V
Cell Voltage:3.2V-4.2V
Capacity: 7500mAh
Suggest Charge Rate: 0.5C-1C (3.75A-7.5A)
Discharge Rate: 100C
Charge Plug: JST-XHR-4P
Discharge Plug: EC5 / XT90 / Deans T / XT60 / TRX Connector (optional)
Wire Gauge: 10AWG Soft and Flexible Low Resistance Silicone Wire
Dimension(L*W*H): 139*47*36mm(±3mm)/5.47*1.85*1.42inch
Approx Weight: 435g（±15g）/0.96lb/15.34oz

11.1V RC Battery Package Included: 
2 Packs x 11.1V Lipo Battery 3S 7500mAh 100C Hard Case 

Please Notice

Use a LiPo‑balance charger only; never exceed 1C (7.5A) charge rate.

Store at 3.8‑3.85V/cell in a fire‑safe bag.

Do not discharge below 3.2V/cell.

Check wires/connectors before each use; stop if puffed or damaged.

Cool down to room temperature before charging after running.

FAQ

Q1: Can I change the connector later if I choose the wrong one?
A: Yes – simply solder a new connector of your choice, keeping correct polarity and using adequate wire gauge to maintain low resistance.

Q2: How long does a full charge take?
A: About 1 hour at 1C (7.5A), or 2 hours at 0.5C (3.75A) – slower charging can extend battery life.

Q3: Will this hard‑case fit my battery tray?
A: Size is 139×47×36mm – measure your tray; most 1/8 and large 1/10 models accept this, with ±3mm tolerance easily adjusted by foam padding.

Q4: How many cycles can I expect before performance drops?
A: With proper care (1C charging, not over‑discharging, storage voltage), you get 150‑200 solid cycle.