Nihewo 6S LiPo Battery 22.2V 22000mAh 30C Compatible with OnyxStar/Gryphon Dynamics Professional Aerial Drones, Agricultural Drones, and eVTOLs

Product Description
This 22000mAh 6S LiPo battery delivers massive 30C discharge power for heavy‑lift drones and high‑speed RC models. Low internal resistance, factory‑matched cells, stable voltage, minimal heat, and extended cycle life. Lightweight yet rugged, it is built for professionals who need endurance and consistent performance under load.

Specification
Chemistry: Lithium Polymer (LiPo)
Capacity: 22000mAh
Configuration: 6S1P
Nominal Voltage: 22.2V
Discharge Rate: 30C Continuous
Connector: XT90/XT90S/AS150+XT150(optional)
Dimensions: 205 x 93 x 66mm (±3mm) / 8.08 x 3.66 x 2.6 in (L x W x H)
Approx. Weight: 2695g (±15g) / 5.94 lb / 95.06 oz

Packing Included
1 x 22.2V 22000mAh 30C 6S LiPo Battery Soft Case

Application
Perfect for DJI S1000/S1000+, professional cinema drones, agricultural UAVs, eVTOL, large‑scale RC planes, cars, trucks, boats, and any 22.2V‑compatible system. Always check voltage, size, and connector compatibility before use.

Please Notice
Use only a 6S LiPo balance charger. Never discharge below 3.5V per cell (21.0V total). Store at 50‑60% charge in a cool, fireproof container. Inspect for puffing or damage before each run. Keep away from moisture, direct sun, and temperatures above 50°C.

FAQ
Q1: How long will it power a heavy‑lift drone?
A2: Roughly 15‑22 minutes at 60‑80A hover draw, depending on payload and throttle usage.

Q2: Can I use my existing 6S charger?
A3: Yes, if it supports 6S LiPo and can charge at 0.5‑1C (11‑22A). Always connect the balance lead.

Q3: Is it safe for cold or hot weather?
A4: Operate between ‑10°C and 50°C. In cold, warm the pack to above 15°C before use; in hot, allow cooling between flights.

Q4: How should I store it for weeks without use?
A5: Store at 3.8‑3.85V per cell (22.8‑23.1V total) in a cool, dry place. Check voltage monthly and recharge to storage level if it drops below 3.75V per cell.