6S Lipo Battery 22.2V 3300mAh RC Battery for RC Airplane Helicopter Quadcopter Drone Car Truck Boat Model (2 Packs)

Description
This 22.2V 6S 3300mAh 80C RC LiPo battery delivers high discharge performance for demanding hobby applications. This battery is safe and reliable for competitive RC driving and flying.

Specification
Material: Li-Polymer
Cells: 6S
Battery Voltage: 22.2V
Capacity: 3300mAh
Discharge Rate: 50C/80C
Voltage per Cell: 3.2-4.2V
Charge Plug: JST-XH
Discharge Plug: EC5/T/XT60
Suggested Charge Rate: 0.5C to 1C (1.65A to 3.3A)
Silicone Wire Gauge: 10AWG
Dimensions (LWH): 136*45*46mm (5.35*1.77*1.81in) ±3mm
Weight: 480g ±15g (1.06lb / 16.93oz)
Certifications: MSDS, UN38.3

Packing Included
2 packs x 22.2V 6S LiPo battery pack (3300mAh)  soft case

Application
Perfect for RC hobbyists – compatible with RC cars, buggies, trucks, truggies, 3D airplanes, small helicopters, drones, FPV systems, and other high-performance electric RC models requiring a 6S 22.2V LiPo pack.

Please Notice

Always use a LiPo-specific charger with balance function.

Do not exceed suggested charge rate (max 1C / 3.3A).

Never discharge below 3.2V per cell to avoid permanent damage.

Store at 3.8V-3.85V per cell in a cool, fireproof location.

Inspect for puffing or damage before each use.

FAQ

Q: What is the maximum continuous discharge current for this 3300mAh 80C battery?
A: The maximum continuous discharge current is 264A (3300mAh = 3.3Ah, multiplied by 80C). This supports high-power RC systems.

Q: Can I use a different discharge plug if my model uses XT90 or Deans?
A: The battery comes with an EC5 plug. You can use an EC5-to-XT90 or EC5-to-Deans adapter, but for best performance and safety, soldering the matching connector directly is recommended.

Q: Is this battery suitable for racing drones or FPV quads?
A: Yes, the 6S 3300mAh 80C pack works well on larger FPV drones and racing quads that require high burst current. However, check your drone’s battery bay size – dimensions are 136x45x46mm.

Q: How should I balance charge this 6S battery with a charger that only supports up to 4S?
A: You need a charger that explicitly supports 6S LiPo batteries (balance port up to 7 pins). A 4S charger cannot properly balance a 6S pack and may cause overcharge or fire.

Q: Why is the weight listed as 480g ±15g? Is that normal for a 6S 3300mAh LiPo?
A: Yes, weight variation within ±15g is normal due to manufacturing tolerances in cell tabs, wire length, and heat shrink. This range does not affect performance or safety.